Stainless Steel Decorative Sheet

Stainless Steel Mirror Finish Sheet - No.8K Sheet - #8K - No 8 
Stainless steel is the most common steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%) metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel and is essentially non-magnetic. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes. 304 stainless steel has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60 °C. It is considered resistant to pitting corrosion in water with up to about 400 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.
304 stainless steel is also very sensitive at room temperature to the thiosulfate anions released by the oxidation of pyrite (as encountered in acid mine drainage) and can undergo severe pitting corrosion problems when in close contact with pyrite- or sulfide-rich clay materials exposed to oxidation.
304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws, machinery parts, and car headers. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.
 
The Japanese equivalent grade of this material is SUS304. It is also specified in European norm 1.4301.
Features
Very good corrosion resistance,
weld ability and cold deformability.
Good deep drawing properties and very good high gloss polish ability.

Specifications: 304
UNS: S30400 | X5CrNi18-10 | 1.4301| SUS 304
 
Specifications: 304L
UNS: S30403 | X2CrNi19-11 | 1.4306 | SUS 304L

Typical Applications

Chemical plants

Air conditioning industry

Petroleum refineries

Space heating industry

Refrigeration industry

Power plants industry

Petrochemical plants industry

Natural gas processing industry

Other Usage:
Food processing equipment, particularly in beer brewing, milk processing & winemaking
Kitchen benches, sinks, troughs, equipment and appliances
Architectural paneling, railings & trim
Chemical containers, including for transport
Heat Exchangers
Woven or welded screens for mining, quarrying & water filtration
Threaded fasteners
Springs.

Stainless Steel Mirror Finish Sheet - No.8K Sheet - #8K - No 8 
Stainless steel is the most common steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%) metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel and is essentially non-magnetic. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes. 304 stainless steel has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60 °C. It is considered resistant to pitting corrosion in water with up to about 400 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.
304 stainless steel is also very sensitive at room temperature to the thiosulfate anions released by the oxidation of pyrite (as encountered in acid mine drainage) and can undergo severe pitting corrosion problems when in close contact with pyrite- or sulfide-rich clay materials exposed to oxidation.
304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws, machinery parts, and car headers. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.
 
The Japanese equivalent grade of this material is SUS304. It is also specified in European norm 1.4301.
Features
Very good corrosion resistance,
weld ability and cold deformability.
Good deep drawing properties and very good high gloss polish ability.

Specifications: 304
UNS: S30400 | X5CrNi18-10 | 1.4301| SUS 304
 
Specifications: 304L
UNS: S30403 | X2CrNi19-11 | 1.4306 | SUS 304L

Typical Applications

Chemical plants

Air conditioning industry

Petroleum refineries

Space heating industry

Refrigeration industry

Power plants industry

Petrochemical plants industry

Natural gas processing industry

Other Usage:
Food processing equipment, particularly in beer brewing, milk processing & winemaking
Kitchen benches, sinks, troughs, equipment and appliances
Architectural paneling, railings & trim
Chemical containers, including for transport
Heat Exchangers
Woven or welded screens for mining, quarrying & water filtration
Threaded fasteners
Springs.

Stainless steel is the most common steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%) metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel and is essentially non-magnetic. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes. 304 stainless steel has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60 °C. It is considered resistant to pitting corrosion in water with up to about 400 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.
304 stainless steel is also very sensitive at room temperature to the thiosulfate anions released by the oxidation of pyrite (as encountered in acid mine drainage) and can undergo severe pitting corrosion problems when in close contact with pyrite- or sulfide-rich clay materials exposed to oxidation.
304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws, machinery parts, and car headers. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.
 
The Japanese equivalent grade of this material is SUS304. It is also specified in European norm 1.4301.
Features
Very good corrosion resistance,
weld ability and cold deformability.
Good deep drawing properties and very good high gloss polish ability.
Specifications: 304
UNS: S30400 | X5CrNi18-10 | 1.4301| SUS 304
 
Specifications: 304L
UNS: S30403 | X2CrNi19-11 | 1.4306 | SUS 304L

Typical Applications

Chemical plants

Air conditioning industry

Petroleum refineries

Space heating industry

Refrigeration industry

Power plants industry

Petrochemical plants industry

Natural gas processing industry

Other Usage:
Food processing equipment, particularly in beer brewing, milk processing & winemaking
Kitchen benches, sinks, troughs, equipment and appliances
Architectural paneling, railings & trim
Chemical containers, including for transport
Heat Exchangers
Woven or welded screens for mining, quarrying & water filtration
Threaded fasteners
Springs.

STAINLESS STEEL GOLD NO.4 FINISH  WHICH COME IN THICKNESS:1MM, 1.2MM
SIZE:-8FT X 4FT.
CODE:-DI 004

Doshi Impex (India) is amongst the global leaders from INDIA, reputed for being known as Exporters, Importers, Suppliers, Stockists and Traders of superior quality STAINLESS STEEL 304 PRODUCTS and RAW MATERIALS.
INTERNATIONAL STANDARDS, CLIENT SPECIFICATIONS, and QUALITY CONTROL are of utmost importance to Us,
Thickness like:  0.8 mm / 0.9 mm / 1 mm / 1.2 mm /1.6 mm / 2.00 mm / 2.5 mm / 3.00 mm 
Size = 8 foot x 4 foot / 1 mtr x 1 mtr / 1250 mm x 2500 mm / 1220 x 2440 mm / 1 mtr x 2 mtr / 1220 mm x 2000 mm / 1250 x 3000 mm / 1500 mm x 3000 mm / 1500 x 5 mtr / 1500 x 6 mtr / 1250 x 5 mtr / 1250 mm x 6 mtr & as per customers cutting size