|Minimum Order Quantity||100 Kg|
|Material Grade||Duplex Bar|
|Single Piece Length||3 Meter, 6 Meter & Custom cut size available|
|Shape||Round, Hexagonal & Square|
|Size||10 mm upto 200 mm Dia|
|Delivery Details||0-2 days|
|Tolerance||As Per Standard|
|Payment Terms||100% Advance Only|
|Test Certificate||NABL Test Report along with material|
|Third Party Inspection Tpi||TO be Borne & Arranged by Buyer|
|I Deal In||New Only|
|Finish||Bright,Polish & Black|
|Form||Round,Square,Hex (A/F),Rectangle,Wire (Coil Form),Wire-mesh,Billet,Ingot,Forging Etc.|
Duplex Stainless Steel Bar:
Range: 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length.
Finish: Bright Black Polish
Form: Round Square Hex (A/F) Bush Rectangle Flat
Trade Name: SAF 2205 Duplex Stainless Steel Bar
Standard: ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface: hrap, hot rolled pickled or sand blasting finished, cold drawn, bright, polished, hairline
Size: Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Material Grades: AISI 201, AISI 202, AISI 301, AISI 302, AISI 303, AISI 304, AISI 304L, AISI 309, AISI 310, AISI 316, AISI 316L, AISI 321, AISI 347, AISI 410, AISI 420, AISI 430, AISI 431, AISI 630, 15-5PH, 17-4PH
Shape Manufactured: Flat Bar, Square Bar, Round Bar, Rings, Hollows, Blocks and special Shapes.
Duplex Stainless Steel Bar
A182 F51, F53, F55.
Hardened & Tempered.
Center less Ground.
Center less Ground & Polished.
SmoothTurned & Polished.
Forged & Rough Turned.
Buffed (Mirror finish).
100% Ultrasonically tested.
ASTM, ASME, AISI, AMS, AFNOR,QQS, B.S, JIS, DIN, MILS and NACE.
|Minimum Order Quantity||500 Kg|
|Steel Grade||Duplex Steel 2304 Sheet|
|Type||Sheet Plate Coil|
|Size||1250 mm x 2500 mm,1500 mm x 3000 mm & 2000 x 6000 mm|
|Payment Terms||100% Advance|
|Test Certificate||NABL Test Report Along with Material|
Alloy 2304 (UNS S32304) is a 23% chromium, 4% nickel, molybdenum-free duplex stainless steel. The Alloy 2304 has corrosion resistance properties similar to 316L. Furthermore, its mechanical properties, i.e., yield strength, are twice those of 304L/316L austenitic grades. Alloy 2304 is a 23% chromium, 4% nickel, molybdenum-free duplex stainless steel. The Alloy 2304 has corrosion resistance properties similar to 316L. Furthermore, its mechanical properties, i.e., yield strength, are twice those of 304/316 austenitic grades. This allows the designer to save weight, particularly for properly designed pressure vessel applications. The alloy is particularly suitable for applications covering the -50°C/+300°C (-58°F/572°F) temperature range. Lower temperatures may also be considered but need some restrictions, particularly for welded structures. With its duplex microstructure and low nickel and high chromium contents, the alloy has improved stress corrosion resistance properties compared to 304 and 316 austenitic grades.
Alloy 2304 (UNS S32304)
ASTM/ASME A240 - UNS S32304
EURONORM 1.4362 - X2 Cr Ni 23.4
AFNOR Z3 CN 23.04 Az
DIN W. Nr 1.4362
Hot forming must be performed in the 1150/900°C (2100/1650°F) temperature range. After forming, a new solution annealing treatment is recommended in the 950°/1050°C (2100°/1650°F) temperature range to fully restore corrosion resistance properties and mechanical properties. Parts formed with 2304 must be supported carefully during heating to avoid creep deformation.
Alloy 2304 may be cold formed without any problem. The same equipment as used for the cold forming of 304L and 316L grades can be used. Due to its higher mechanical properties, including the yield strength, higher stresses are required for cold forming. A final solution annealing heat treatment is also recommended after cold forming in order to restore the mechanical and corrosion resistance properties, as described in hot forming.
Use the same solutions and pastes as for Alloys 304L/316L. The pickling time will be higher than for austenitic grades due to the corrosion resistance properties of the alloy.
Alloy 2304 duplex exhibits improved machinability properties particularly when considering drilling. Its behavior is equivalent to that of 316LEZ. Furthermore, 2304 has better corrosion resistance and cleanliness properties as no sulphur additions are necessary. Localized corrosion resistance behavior is improved.
Generally where 304 and 316L are used
Pulp and paper industry (chip storage tanks, white and black liquor tanks, digestors)
Caustic solutions, organic acids (SCC resistance)
Pressure vessels (weight savings)
Reviewed by 29 Users
Most Relevant Reviews